The Dream Slimline Convector gas fire allows modern homes with shallow flues to enjoy the classic looks of the Dream. This model offers both radiant and Activeheat through the means of convection by drawing cold air in from the room, passing it though a heat exchanger to warm it up and back out into the room providing exceptional heat output. Easy to operate with Fireslide control, this model boasts a black,chrome or pale gold finish to compliment any room setting.
|Min Heat Output
|Max Heat Output
|Nett Efficiency Rating
|EU Energy Rating
||Brick Chimney; Pre-fabricated Flueâ€ ; Pre-cast Flue *
||â€ These fires are suitable for most pre-fabricated flues dependent on the flue depth and diameter. Please refer to the installation instructions to ensure that this fire is compatible. *Due to the sheer number of varying flue boxes and pre-cast flues it is not possible to advise on which fires are suitable until the existing fire has been removed. If the width at the rear of the pre-cast flue starter blocks is less than 300mm wide the minimum depth of the opening will be not less than 154mm
||Hearth or Wall Mounted. If wall mounted then a small plinth is required to support the fret/ashpan.
||LPG Conversion Kit available – Part No. 0595221
|Engine Depth (mm)